How to - Valentine's Day Felt Card Tutorial

Ohhh it's that smoochy time of year coming up again and so I thought I'd do a fun little no-sew felt tutorial for you.

Here's what we're making:

It's a fairly simple tutorial, so I'm going to put the step by step instructions in the comment field for each photo.

If you're looking for presents to go with your handmade card, have a look in my Etsy Shop and also at Uniquely UK for masses of gorgeous pressie ideas!

Obviously you can change the slogan, but as it's supposed to be a jigsaw puzzle I chose 'We are a perfect fit!'

Materials:

Card (I had a pre-fold card in my stash, but you can always fold in both ends to meet like a door)
Thick red felt (if you want to make your felt thicker you can glue two layers together but it doesn't matter if it's thinner felt)
Paper
Pencil
Ruler
Red Pen
Glue

Instructions:

1. All the materials you'll need

Fold the piece of paper in half and draw half a heart shape as shown

Cut out the heart shape (with the paper folded over so you have a perfect heart shape)

Using your pencil, draw around the heart onto the felt.

Draw a jigsaw shape into the heart. I went straight down the middle, but you can do it in any shape and on any angle you like.

Cut the heart into two pieces according to your jigsaw line

Draw around the jigsaw line, using one side of the paper template (it doesn't matter which you use)

The trickiest bit is to cut out the heart and cut the jigsaw line into the shape keeping both sides looking perfect... small cuts and take it slowly is the best advice.

Your cut out heart should look like this when placed back together.

Using your paper heart, work out where to draw your lines on the card (you may need more or less lines, depending on what you want to say)

Write your message in pencil first, to make sure it fits on ok.

Go over the pencil writing with your red pen.

Then stick your heart onto either side of the card, so when it's closed, the heart fits together.

If you don't want to use a card like the one above with two doors, you can use a standard folded piece of card and either stick the heart pieces together, or just apart to make the jigsaw shape more obvious.

When the red pen is dry, rub out the pencil marks and you're done :-)

I hope you all have a very Happy Valentine's Day!

How to Make a Felt DIY Pirate Sword Tutorial

Arrrrrrr, me hearties! It be International Talk Like a Pirate Day!

Yesterday I shared a Felt Pirate Eye Patch Tutorial which was admirably modeled by my own little Pirate last night:

And was then borne off to school by my bigger Pirate this morning:

So today I'm going to share with you my tutorial for making a Felt Pirate Sword. This is quite timely as my smallest Pirate was bought one (a very flimsy one!) last weekend and promptly broke it, so he needed a replacement!

You will need:

- Cardboard - A4 size (either two pieces of thinner cardboard stuck together or a piece of thick cardboard that won't flop about when waved about)
- Grey Felt (9" x 8")
- Black Felt (11" x 6")
- A Biro
- Strong Scissors (for cutting the cardboard)
- Grey & Black embroidery thread
- A piece of ribbon and matching embroidery thread
- Glue
- Template (which can be found at the end of the tutorial)

First cut out the template and draw round it onto the cardboard & cut out. (if you are using thin cardboard, cut two pieces and stick them together)

Then draw around the cardboard onto the grey felt with your biro and cut out leaving a 1/4" extra around the edge

Flip the cardboard sword over and repeat so you have two mirror images on the grey felt for the blade part of the sword

Then repeat on the black felt for the handles. If you have tailors chalk you can use that to draw round to see the lines more easily, but I found I could just about see the biro lines if I held the felt up to the window:

Then using a bit of glue to keep the grey felt in place, with the grey embroidery thread (2 strands) blanket stitch neatly all the way round the grey felt to make the blade

Next using glue to keep the black pieces in place, with the black embroidery thread (2 strands) blanket stitch all the way round the black felt to make the handle.

Lastly sew or tie a piece of ribbon around the join between the black & grey felt

And now you're ready for a swashbuckling adventure!

Please feel free to make this felt sword as many times as you like for personal use, but please do not sell either the finished items, or the tutorial and if you blog or want to share any of the pictures from the tutorial, please link back to this post.

I'd love to see any Piratey pictures that you take if you've created either the eye patch or the sword using my tutorials, so please feel free to send them to simmi@gracesfavours.co.uk

Enjoy!

How to Make a Felt DIY Pirate Eye Patch Tutorial

In honour of tomorrow being my favourite celebration day, International Talk Like a Pirate Day I thought I'd share a tutorial with you today, ready for your little Pirates to wear tomorrow (or any time if your kids are like mine!)

A Felt Pirate Eye Patch

You will need:

Black Felt
White Felt
Black Elastic
Scissors
White & Black embroidery thread
A pencil or tailors pen
The pattern (which can be found at the end of the tutorial)

Step One:

Cut out 2 black eye patch pieces and 1 white skull & cross bones piece

Then using the skull & cross bones template as a guide mark on the white felt the position of the eyes and the nose and using sharp embroidery scissors cut out the eye sockets and the nose

Then using either a sharp pencil or a tailor's pen (which has disappearing ink) draw on your mouth and teeth:

Then using the black embroidery thread (2 strands) and using a back stitch, embroider on your mouth and teeth. You should now have a finished skull

Next using the white embroidery thread (again 2 strands) with a simple running stitch, sew on the skull and cross bones to the top layer of the eye patch

Once you've gone all the way round, your eye patch will look like this

Next using your black embroidery thread sew the elastic onto the back piece of the eye patch, securely going over it a number of times

Then repeat for the other end

Then pin your front eye patch piece to the back and sew round the edges, using your black embroidery thread and using a simple running stitch, but making sure you go over the elastic bits 2 or 3 times to ensure they're secure

And tie off your thread neatly at the back.

You now have an eye patch fit for a real Pirate, me hearty! Arrrrrrr!

And here is my little Pirate modelling her eye patch

I'm afraid (as is always the way!) that my printer/scanner has just decided to play up, so I've taken a photo of the template page and will get my husband to scan it in for me from work tomorrow, so it should be available as a printable sheet then! Why do printers always go wrong at just the most inconvenient moment?!

Please feel free to make as many of these eye patches as you'd like for personal use, but please do not sell the finished articles or the instructions.

I'd love to see any pictures of anything that you make using any of my tutorials, so please do feel free to email me a picture at simmi@gracesfavours.co.uk

Enjoy and Arrrrrrrrrrr!

Another felt tutorial will be available tomorrow.

We're all going on a summer holiday...

.... Okay, now I'm showing my age with that title aren't I?!?! (Or I could just blame it on my Mum's love of Sir Cliff!)

We're off to Ireland tomorrow to visit my lovely 'out-laws' (don't quite know why my hubby's wonderful parents have always been called that, but it's stuck now!) and I honestly don't know who is more excited... me & Brian or the kids :-)

Brian & his brother Tony braving the sea last summer

Seren & Patrick refusing to leave the blanket!

I've got a ton of sewing to take with me as I'm doing a summer fate when we get back - anyone local to the Forest of Dean if you're around on Sunday 29th July we'd love it if you'd pop in and say hello. I've been so busy with orders that I've not had much chance to build up stock for things like this (which is great in one sense!) so this fortnight is going to be a nice change for me.

The other thing I've been working on this week (and it was a last minute request, so scuppered my chances of blogging for an evening or two!) was a Christmas Wreath which had been asked for by the Etsy UK Publicity team for their 'Christmas in July' event, which is held to promote a select number of UK based Etsy shops to journalists and publicity types in the hope that they will use some of the items in their festive shopping guides!

I was OVER THE MOON to be asked to participate and this morning I sent off my Christmas Wreath:

It is listed in my Etsy shop already because a lovely customer asked me in May (I dream of being that organised!) to put together a wreath for him to send to family in America and I am so pleased now that it was done in time to get into the Christmas marketing timescales.

The other thing that's been quite fun this week has been an order of rainbow VW Campervans:

Lastly I just wanted to finish with an apology... when I started this blog I intended to write a new post at least 2-3 times a week... well I've failed miserably on that score. So my mid-year resolution is to post more often when we get back from holiday (starting with the pre-requisite holiday snaps!)

Hope you have a good couple of weeks with some sunshine!!